|
|





What is Spotless Stainless Rust Remover? Spotless Stainless, Rust Remover and Protector is used to remove ferric oxide (rust) and remove free iron from the surface of Stainless Steel. By removing the free iron Spotless Stainless leaves a chromium rich layer which will react with oxygen to form Chromium Oxide. This oxide layer is what protects Stainless Steel. What are the factors that control the effectiveness of Spotless Stainless? Primarily Time and Temperature, Spotless Stainless Rust Remover must remain moist to stay active. If using in direct sunlight or other hot environments, it may be necessary to lightly re-brush Spotless Stainless to keep the solution from drying. Other factors are temperature and time. Spotless Stainless Rust Remover can be used at room temp (70 degrees F) and up to 170 degrees F. The lower the temperature the more time may be required to get maximum results. The warmer the temperature the better the results in less time. Is Spotless Stainless a polish? No, polishes are abrasive and may cause damage to the surface of stainless steel by removing the protective chromium Oxide layer. Spotless Stainless removes both rust (ferric oxide) and the "free iron" that causes rust from Stainless Steel. Spotless Stainless Rust Remover is specifically designed for the marine environment to provide efficient removal of rust and "free iron" from stainless steel and provide the highest chrome oxide levels possible. How it Works >> How long does Spotless Stainless Cleaner and Protector Last? This depends on the quality of the Stainless Steel being cleaned, the finish of the Stainless, the environment and is difficult to predict. We have experienced 6 - 8 months before seeing any rust appear. We have reports of similar experiences from others who used Spotless Stainless. We also have reports from ocean going vessels of less time before seeing rust appear. Series 304 Stainless has no resistance to salts and will pit when exposed to sea water. If rust does appear quickly after exposure to sea water you may need to coat your stainless after removing the rust and "free iron" with Spotless Stainless Rust Remover. After using Spotless Stainless expose the stainless in air for up to 24 before applying a coating. Exposing the rich chromium surface left behind by Spotless Stainless to air will thicken the protective oxide layer. Continued >> |
Frequently Asked Questions |
News |
Spotless Stainless Makes Stainless Steel Sparkle.. |
Copyright 2009 Spotless Stainless contact@spotlessstainless.com |
Special - Save 10% on a 2 Qt Bundle plus Free Shipping - Save 15% on a 4 Qt Bundle plus Free Shipping Buy Now >> |
Spotless Stainless available in the Caribbean at Island Water World.. |
Spotless Stainless available at Annapolis Sailboat Show Oct 7 - 11 Tent X Booth X5 |